BS EN ISO BRITISH STANDARD 9100-10:2005 Glass containers Vacuum lug finishes 一1 Part 10: 77 regular The European Standard EN IS0 9100-10:2005has the status of a British Standard ICS 55.100 BSi British Standards BSENISO9100-10:2005 National foreword This British Standard is the official English language version of EN ISO 9100-10:2005.It is identical with ISO 9100-10:2005. The UK participation in its preparation was entrusted to Technical Committee BSI PKW/o, Packaging, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled"International Standards Correspondence Index", or by using the“Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication This British Standard was published under the authority Amd. No. Date Comments of the Standards Policy and Strategy Committee on 11 February 2005 BSI 11February 2005 ISBN0580454398 EN ISO 9100-10 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHENORM January2005 BSI ICS55.100 Englishversion Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO9100-10:2005) Recipients en verre - Bagues a crans pour bouchage sous Glasbehalter - Vakuum-Nockenverschluss-Mundungen - vide - Partie 10: 77 regular (ISO 9100-10:2005) Teil 10: 77 regular (ISO 9100-10:2005) This European Standard was approved by CEN on 23 September 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France. Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia. Slovenia, Spain, Sweden, Switzerland and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG Management Centre: rue de Stassart, 36 6B-1050Brussels @2005CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 9100-10:2005:E worldwideforCENnationalMembers.