BS EN IS0 7250-1:2017 Bsl Standards Publication Basic human body measurements for technological design Part 1:Body measurement definitions and landmarks (Is0 7250-1:2017) bsi. BSENIS07250-1:2017 BRITISH STANDARD National foreword ThisBritish Standard istheUK implementationof ENIS07250-1:2017 It is identicalto IS07250-1:2017.It supersedesBS ENIS07250-1:2010, which is withdrawn. The UK participation in its preparation was entrusted to Technical CommitteePH/9/-/4,Ergonomics-AnthropometryandBiomechanics A listof organizationsrepresented on this committee can beobtained on requestto its secretary. This publication does not purport to include all the necessary provisions of a contract.Users are responsiblefor its correct application. @TheBritish Standards Institution2017 Published by BSI Standards Limited 2017 ISBN9780580876134 ICS 13.180 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the StandardsPolicyandStrategyCommitteeon31October2017. Amendments/corrigendaissuedsincepublication Date Text affected BSENISO7250-1:2017 EN IS0 7250-1 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM September 2017 ICS 13.180 Supersedes ENIS0 7250-1:2010 English Version Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (IS0 7250-1:2017) Definitions des mesures de base du corps humain pour Wesentliche Mafe des menschlichen Korpers fur die la conception technologique - Partie 1: Definitions des technische Gestaltung - Teil 1: Korpermafsdefinitionen mesures du corps et reperes (Is0 7250-1:2017) und -messpunkte (Is0 7250-1:2017) This European Standard was approved by CEN on 9 September 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,Latvia, Lithuania Luxembourg, Malta, Netherlands, Norway,Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels @2017CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 7250-1:2017E worldwide for CEN national Members.