International ISO Standard ISO2 22915-1 Third edition Industrial trucks Verification of 2024-06 stability- Part 1: General Chariots de manutention-Véerification de la stabilité- Partiel:Generalites Reference number IS0 22915-1:2024(en) O SO 2024 ISO 22915-1:2024(en) COPYRIGHT PROTECTED DOCUMENT @ISO2024 be reproduced or utilized otherwise in any form or by any means,electronic or mechanical,including photocopying,or posting on the internet or an intranet,without prior written permission.Permission can be requested from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office CP 401-Ch.de Blandonnet 8 CH-1214 Vermier,Geneva Phone:+41227490111 Email:copyright@iso.org Website: www.iso.org Published in Switzerland ISO 2024-All rights reserved ii ISO 22915-1:2024(en) Contents Page Foreword .iv 1 Scope 2 Normative references 3 Terms and definitions Stability tests for trucks 4 4.1 General 4.2 Test procedure 4.3 Verification procedure 4.3.1 Operation of the tilt table and test criteria 4.3.2 Calculation 4.3.3 Other methods 4.4 Test conditions 4.4.1 Condition of the truck 4.4.2 Position ofthe truck on the tilt table 4.4.3 Test load , lift height and standard load centre distance 4.5 Safety for testing precautions 4.6 Stability verification for trucks with attachments 4.7 Stability verification for low -lift trucks 5 Documentation Bibliography ISO 2024-All rights reserved ili