BS EN IS0 22125-2:2019 BSl Standards Publication Water quality - Technetium-99 Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) bsi. BSENIS022125-2:2019 BRITISH STANDARD Nationalforeword This British Standard is theUK implementation of ENIS022125-2:2019. ItisidenticaltoIS022125-2:2019. The UKparticipation inits preparation was entrustedto Technical CommitteeEH/3/8,Radioactivitymeasurementsmethods. A listoforganizationsrepresented onthis committee can be obtained on requestto its secretary. This publication does not purportto include all the necessary provisions ofa contract.Users areresponsiblefor its correctapplication. @The British Standards Institution2019 Published by BSI Standards Limited 2019 ISBN9780580995972 ICS13.060.60;17.240 Compliance with aBritish Standard cannot conferimmunityfrom legal obligations. This British Standard was published under the authority of the StandardsPolicyand Strategy Committeeon31December2019 Amendments/corrigendaissuedsincepublication Date Text affected BSENISO22125-2:2019 EN IS0 22125-2 EUROPEANSTANDARD NORMEEUROPEENNE EUROPAISCHE NORM November 2019 ICS13.060.60;17.240 English Version Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (IS0 22125-2:2019) Qualite de I'eau - Technetium-99 - Partie 2: Méthode Wasserbeschaffenheit - Technetium 99 - Teil 2: d'essai par spectrometrie de masse couplee a un Verfahrens mittels Massenspektronomie und induktiv plasma induit (IS0 22125-2:2019) gekoppeltem Plasma (ICP-MS) (IS0 22125-2:2019) This European Standard was approved by CEN on 8 September 2019. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centrehas the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels @2019CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 22125-2:2019 E worldwide for CEN national Members.