BS EN IS0 1825:2017 BSl Standards Publication Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification bsi. BSENIS01825:2017 BRITISH STANDARD National foreword This British Standard is theUK implementation of ENIS01825:2017.It is identicaltoIS01825:2017.It supersedesBSENIS01825:2011,which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/66, Rubber and plastics tubing, hoses and hose assemblies. requestto its secretary. This publication does not purport to include all the necessary provisions ofa contract.Users areresponsibleforits correctapplication. @TheBritish Standards Institution2018 PublishedbyBSIStandardsLimited2018 ISBN9780580927768 ICS 83.140.40; 49.100 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Amendments/corrigenda issuedsincepublication Date Text affected BSENISO1825:2017 EN ISO 1825 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM December 2017 ICS 23.040.70; 49.100 SupersedesENIS01825:2011 English Version Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (IS0 1825:2017) Tuyaux et flexibles en caoutchouc pour le Gummischlauche und -schlauchleitungen furdie ravitaillement carburant et la vidange des avions au sol Bodenbetankung und Entleerung von Flugzeugen - - Specifications (IS0 1825:2017) Anforderungen (IS01825:2017) This European Standard was approved by CEN on 17 November 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEEFURNORMUNG CEN-CENELECManagement Centre:RuedelaScience23,B-1040Brussels @2017CEN All rights of exploitation in any form and by any means reserved Ref.No.ENISO 1825:2017E worldwide for CEN national Members.