BS EN ISO 15025:2016 BSl Standards Publication Protective clothing - Protection against flame Method of test for limited flame spread (is0 15025:2016) bsi. BSENISO15025:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 15025:2016. It supersedes BS EN ISO 15025:2002 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PH/3/2, Heat and Flame Personal Protective Equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @ The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN978 0580813887 ICS 13.220.40; 13.340.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2016. Amendments/corrigenda issued sincepublication Date Text affected EN IS0 15025 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM December 2016 ,Version correct as of 27/02/2017 ICS13.220.40;13.340.10 SupersedesENIS015025:2002 English Version Protective clothing - Protection against flame - Method of test for limited flame spread (IS0 15025:2016) Vetements de protection - Protection contre les Schutzkleidung - Schutz gegen Flammen flammes -Méthode d'essai pour la propagation de Prufverfahren fur die begrenzte Flammenausbildung flamme limitee (IS015025:2016) (ISO 15025:2016) This European Standard was approved by CEN on 21 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility ofa CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHESKOMITEEFURNORMUNG CEN-CENELECManagement Centre:Avenue Marnix17, B-1000 Brussels @2016CEN All rights of exploitation in any form and by any means reserved Ref.No.ENISO 15025:2016 E worldwidefor CEN national Members.